|
MIRROR HEATER
PACK - SERIES 2 - SLIMLINE *
by Monarch Mistfree Mirrors Pty Ltd
the low-cost alternative - suitable in
situations of consistent moderate ambient temperature*
The components of the
Series 2 Mirror Heater Pack are-
~ mirror warming element
~ inert insulation layer
~ encapsulating lamination
~ pressure sensitive adhesive with release liner
~ cord connection
~ power cord
Technical Details:
Voltages- 100V, 110V, 220V, 240V AC
Rating- 200 Watts/sq.m.
Fitted with PVC sheathed "oval" flexible power cord
DOUBLE INSULATED
Complies with AS3100, BS3456, 72/23/EEC
Electricity Authority Approval No. CS/557/Q
Normal Operating Temperature* : ambient + 15 degC approx.
Mirror Heater Pack
Sizes (Series 2) : Overall size
|
Stock No. 35S2 |
#350mm x 550mm |
|
Stock No. 43S2 |
#430mm x 550mm |
|
Stock No. 55S2 |
550mm x 550mm |
|
Stock No. 71S2 |
550mm x 710mm# |
|
Stock No. 85S2 |
550mm x 850mm# |
|
Stock No. 101S2 |
550mm x 1010mm# |
# = cord exits centre this side edge
Other sizes on application
Depth: 0.5mm (excepting cord connection)
Cord connection: 25mm x 40mm x 10mm(H)
Length of power cord: 1500mm or as specified
FIXING INSTRUCTIONS
|
1.
|
Place mirror on flat surface
and provide total support under mirror glass (Rear of mirror
must be clean and dry)
|
|
2.
|
Establish position for
power cord exit and path to power
|
|
3.
|
Mark position for Mirror
Heater Pack on rear of mirror
|
|
4.
|
Peel release liner from
leading edge of Mirror Heater Pack
|
|
5.
|
Align exposed adhesive
edge of Mirror Heater Pack with corresponding marks
|
|
6.
|
Commencing from starting
edge allow Mirror Heater Pack to join rear of mirror by peeling
off release liner and applying pressure firstly along centreline
- avoid air bubbles from forming
|
|
7.
|
Apply pressure to
complete area of Mirror Heater Pack (a paint roller is a useful
tool for good bonding)
|
Series 2 Mirror Heater
Packs are 0.5mm in depth (except cord connection)
Preparation for
installation of Monarch Series 2 Mirror Heater Pack
Series 2 Mirror Heater
Packs are only 0.5mm in depth (excepting cord connection) and
units may be fitted in a correspondingly small space. A small cavity to
allow for the depth
of the cord connection and any excess cord behind the mirror can be
provided by making
a recess in the wall or the wall lining material. (If the Mirror Heater
Pack is attached to a
framed mirror the depth of the frame may provide space for the cord
connection)
Specifications of units may be subject to change - please check when
specifying
"It's never too late to update !
|
