|
MIRROR HEATER
PACK - SERIES 1
Exclusive superior quality and design by Monarch Mistfree Mirrors Pty
Ltd
- the simple, quick and easy
solution to prevent mirror "fog"
The components of the
Monarch Series 1 Mirror Heater Pack are-
* mirror warming element
* thermal insulation layer
* semi-rigid backing sheet
* rigid edge capping
* pressure sensitive adhesive with release liner
* sheathed 2 core power cord
* thermostat
Technical Details:
Voltages- 220/240V, AC (also 100/110V -
200 watts/sq.m.)
Rating- 200/230 Watts/sq.m.
DOUBLE INSULATED
Complies with AS3100, BS3456, 72/23/EEC
Electricity Authority Approval No. CS/557/Q
Normal Operating Temperature : ambient + 16 degC approx.
Hi-limit Thermostat : 40 +/- 2degC
Series 1 Mirror Heater Pack Sizes: (Overall
size)
|
Stock No. 1518TC |
#370mm x 450mm |
|
Stock No. 1824TC |
#450mm x 590mm |
|
Stock No. 2424TC |
590mm x 590mm |
|
Stock No. 2436TC |
#590mm x 905mm |
|
Stock No. 2448TC |
590mm x 1200mm# |
|
Stock No. 3636TC |
905mm x 905mm |
|
Stock No. 3648TC |
905mm x 1200mm# |
NOTE: # = cord exits centre this side edge (see diagram) or
to suit
Other sizes available on application
Depth of Series 1 units: 8.0mm. Length
of power cord: 1500mm or as required
Specifications of units
may be subject to change - please check when ordering.
FIXING
INSTRUCTIONS
.
| 1. |
Place mirror on flat surface and
provide total support under mirror glass (Rear of mirror must be
clean and dry) |
| 2. |
Establish position for power
cord exit and path to power |
| 3. |
Mark position for Mirror
Heater Pack on rear of mirror |
| 4. |
Peel release liner from
leading edge of Mirror Heater Pack |
| 5. |
Align exposed adhesive edge
of Mirror Heater Pack with corresponding marks |
| 6. |
Commencing from starting edge
allow Mirror Heater Pack to join rear of mirror by peeling off
release liner and applying pressure firstly along centreline -
avoid air bubbles from forming |
| 7. |
Apply pressure to complete
area of Mirror Heater Pack (a paint roller is a useful tool for
good bonding) |
Series 1
Mirror Heater Packs are 8mm in depth
The cavity for the Series 1 Mirror
Heater Pack may be provided by :
- the omission of tiles or rendering
behind the mirror
- mirror mounted to plywood backing - remove section for Mirror Heater
Pack
- the sheeting (or dual layers) of lining board - remove section for
Mirror Heater Pack
- by spacers or packing techniques
- within the mirror frame.
"It's never
too late to update !" |
